How to Replace a Saab 9-3 Key
The Saab 9-3 has an impressive amount of appeal for drivers. It is powerful and has excellent visibility. It has a high safety rating.
It is vital to have two keys that work for your vehicle. If you lose one key, it could be very expensive to add an additional one.
How to replace the ignition Key on the Saab 9-3
If your car's keys won't turn on it is time to replace it. This guide will guide you through how to do it on a Saab 9-3. You'll need to replace the key, purchase another reprogrammable device, and buy a brand new case for your key-fob.
Most modern Saab models make use of a transponder instead of a traditional key to unlock the car and begin it. The reprogrammable batteries inside the key-fob will eventually expire, and they will not be able to hold charge. This is especially applicable if you are using the same key for the same lock.
The good part is that the battery is easily replaced by an experienced locksmith. If you've got the right tools, and a little patience you can do it yourself. The first step involves separating the key-fob. Insert a flathead into the slot that is in the middle of your case. You will need to be careful, as the plastic is extremely thin and easily damaged.
Once the case is open then you can prepare the new key by combining the lower part of the old key with the transponder and banana on the new key. This will ensure the new key is properly connected to your CIM and can be a major difference when replacing the sole keys for your Saab 9-3.
How do I replace the ignition Key in a Saab 900
If you don't have two keys, you'll need to take off the dashboard and steering wheel to get to the ignition. Begin by disconnecting the negative battery cable. After saab spare key has been disconnected, you can take off the dashboard and trim pieces around the steering wheel. Once the dash is removed, you can push a screwdriver into the hole on the back of the ignition switch and remove it.
The ignition barrel has the key lock, which could stop the vehicle from starting if key isn't in it. If the ignition switch on your 900 isn't working correctly, make sure to check if the key is in the lock or snared in the barrel of ignition. It's also an excellent idea to rotate your keys on a regular basis and keep them clean to ensure that they don't get bent.
Saab cars differ from other cars due to the fact that they do not use traditional metal keys. Instead, the car recognizes the electronic signals generated by the key fob through a special chip embedded in it.
If you only lose one key fob that is working, your dealer will charge a premium to replace your computer module (also known as the CIM). But we can reprogram your existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you over 50% of what the dealer charges! This is the SAAB Key PROGRAM. Find out more here!
How to replace the ignition Key on a Saab 9-5
The metal part of the classic Saab keys is easy to duplicate and doesn't pose a significant threat to theft of vehicles. The real security comes from the electronic part of the key-fob, which has a chip inside that recognizes your car when it's put into the ignition switch.
Saab's anti-theft system has been relying on this technology for over 10 years. It's not as good as an actual lock on the door but it makes the act of stealing your car more difficult. That's why every Saab owner should always keep an extra key on hand.
The majority of new Saabs come with two keys, but they can be added at the dealer's expense using a handheld device, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which have more modern and advanced features that require a separate key-fob, and utilize a different process.
If you lose all keys or keys, the dealer will replace your CIM or TWICE modules, and charge you the cost of replacement. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.
How to Replace the Ignition Key in a Saab XC90
If your SAAB 9-3 key fob starts having problems turning the barrel of the lock, it may be time to replace it. It's rather simple and doesn't need you to visit an agent. Instead, you can do it yourself at home by using a few simple tools.
First, you'll need to make the keys for your new car. Before you begin, disable the anti-theft system by placing blocks underneath the rear wheels and activating your handbrake. Then, you can insert the key into the ignition and move it to the on position that activates the accessories but it does not start the engine. Repeat this procedure 5 times, and then keep the key on the "on" position.
The next step is to get a replacement case for your key fob. They can be found at any auto parts store and they're generally quite affordable. You can buy them without electronics depending on the model.
To open up the case, insert a flathead screwdriver inside the slot that is in the middle. Gently work it. The case will split easily, and once you've got it open, you'll get access to the internal electronics. Use a flathead screwdriver, which will gently pry open the electronic components.